Will fit:

Saab 9-5 - 1998-2010 - all manual, performance versions with 2.0 and 2.3 Petrol engines

This clutch is designed for high revving engines where the vehicle’s power has been increased 25-30% above standard.

All Black Diamond clutches are designed as direct replacements to standard units using the original manufacturer’s bolt holes, no modification of the flywheel is necessary and the standard clutch release mechanism can be retained.

They come with either sprung or rigid drive plates according to whether the car has a single mass or dual mass flywheel, ensuring that the car’s drive train is protected from shock loads.

Important Stage 2 Clutch Bedding in Information

Black Diamond Stage 2 clutches have a bedding in period of 600-700 miles of driving in traffic. The material used for friction does not reach it’s full friction properties until the surface is fully “roughed” up.

Normal driving is required with as many gear changes as possible. If the clutch does begin to slip – which is normal for the stage 2 during the bedding in period – back immediately off the power, allow the clutch to re-grip and then start again.

If you have a single mass flywheel conversion then please contact us before order as these are designed only for the original flywheel

Only suitable for manual transmission vehicles